D-Tech Embrace LC Orthodontic Bonding Kit

• 1 x 5g Adhesive Paste Syringe
• 1 x 3ml Primer Bottle
• 1 x 3g Ortho Etch Syringe
• 1 x 2pcs Angled Tips
• 1 x 5pcs Fibered Applicator Tips

Cleaning of Teeth:

• Clean teeth with pumice powder and water.
• Ensure teeth are dry using oil/moisture-free air.

Etching & Rinsing:

• Apply etchant on the entire bonding area using a dabbing action.
• Leave etchant in place for 20 seconds (90-120 seconds for primary/high fluoride teeth).
• Rinse thoroughly with water and dry with oil/moisture-free air. The enamel should appear chalky white.

Primer Application:

• Dispense one or two drops of primer onto a mixing pad.
• Apply a thin layer of resin onto the etched enamel surface.
• Dab cured resin with alcohol to clean saliva contamination.

Paste Application:

• Apply the paste onto the bracket base.
• Position the bracket onto the tooth, pressing lightly to prevent excess paste extrusion.

Curing Process:

• For metal brackets, shine curing light from gingival and incisal edges for a minimum of 15 seconds each.
• For ceramic or polycarbonate brackets, cure directly for 20 seconds.
• Archwire placement is possible once the paste is properly cured.

Bracket Removal:

• To remove the bracket, use a ligature cutter.
• Grab the adhesive at the enamel/adhesive interface and separate from the tooth surface.
• Any remaining resin can be removed with a scaler.

Precautions:

• Wear gloves, a mask, and protective eyewear during the procedure.
• Do not anesthetize the patient.
• Avoid contact of primer or paste with skin, eyes, and soft tissues.
• Recap the bottle tightly after use.