Ivoclar Te-Econom Plus Composite Refill
$ 17.38
8 sold in last 20 hours
Hurry! Over 12 people have this in their carts
Brand: Ivoclar Vivadent
Light-curing, radiopaque hybrid composite
| Quantity | Price |
|---|---|
| 2 - 5 | $ 17.21 |
| 6 - 10 | $ 17.03 |
| 11 - 20 | $ 16.68 |
| 21 - 50 | $ 16.51 |
| 51 + | $ 16.16 |
... people are viewing this right now
Features
- Excellent physical properties
- Good polishability
- High radiopacity
- Long Working time
- Proven Ivoclar Vivadent technology and quality
Description
Te-Econom Plus is a light-curing, radiopaque hybrid composite which has excellent physical properties and great polishability that makes it suitable for use in both anterior and posterior restorations. The high radiopacity allows easy identification in x-rays. Te-Econom Plus has a long working time that helps the clinical perform the dental procedure efficiently.
INDICATIONS
- Restorations of Classes I to V
- Esthetic anterior restorations
- Posterior restoration of stress-bearing areas.
ADVANTAGES –
- Excellent physical properties.
- Good polishability.
- High radiopacity.
- Long Working time.
- Proven Ivoclar Vivadent technology and quality.
Key Specifications
Composition:
- Te-Econom Plus consists of dimethacrylate and TEGDMA (22 wt%).
- The fillers include barium glass, ytterbium trifluoride, silicon dioxide and mixed oxide (76 wt% or 60 vol%).
- Additives, initiators, stabilizers and pigments are additional contents (2 wt%).
- The particle size of inorganic fillers is between 0.04 and 7 ﾂｵm.
- The mean particle size is 850 nm.
Storage temperature2・8 degrees C (36・2 degrees F)
Packaging
- 1 x 4gm syringe
Direction to Use
- Select the shade. For facilitated access to the treatment field, the flexible and patient-friendly mouth opener OptraGate can be used.
- Establish sufficient isolation, preferably with a rubber dam (complete isolation is ensured with, for example, the anatomically shaped OptraDam Plus).
- Prepare the cavity according to the requirements of the adhesive technique.
- Clean the cavity with water spray.
- Air dry the cavity.
- Apply a pulp protector (calcium hydroxide) if needed; only cover areas close to the pulp and subsequently apply a pressureresistant cement (e.g. Vivaglass Liner).
- Place a matrix (e.g. the selectively thinned OptraMatrix) and an interdental wedge, if required.
- Apply Eco-Etch on the enamel and then on dentin and allow a reaction time of 30 seconds on enamel and 15 seconds on dentin. After that, thoroughly rinse with water spray and dry the tooth surfaces with oil-free compressed air. Avoid dehydrating the dentin.
- Apply a generous amount of Te-Econom Bond on enamel and dentin, using the enclosed applicator brush. Brush the material gently into the dentin for 10 s. Next, evaporate any remaining solvent with a slow stream of air. Lightcure the adhesive according to the curing time recommendations below. Ensure complete coverage of the preparation surface.
- Apply Te-Econom Flow in layers of a max. of 2 mm and light cure according to the curing recommendations below. Apply Te-Econom Plus in layers of max. 2 mm and adapt/contour the material with a suitable instrument (e.g. OptraSculpt). The OptraContact instrument can be used to selectively position high-quality proximal contacts. Polymerize each layer individually according to the table below. Hold the light emission window as closely as possible to the surface of the restorative material.
- Finish the restoration with suitable finishers or fine diamonds. Subsequently, check the occlusion. Polish with silicone polishers (e.g. OptraPol Next Generation).
