fbpx

Coltene Spec 3 LED Curing Light

$838,50

9 sold in last 17 hours
Hurry! Over 19 people have this in their carts

3 Distinct Power Modes, Ergonomic lightweight design, High intensity output for rapid polymerization, Intuitive and simple controls for ease of use,
,  ,

Bulk Inquiry
  ... people are viewing this right now

  Share
Guaranteed & Safe Checkout by

Features

  • 3 Distinct Power Modes
  • Ergonomic lightweight design
  • High intensity output for rapid polymerization
  • Intuitive and simple controls for ease of use
     
  • Description

     
    S.P.E.C. 3 LED is a curing light intended for rapid polymerization of light-cured materials by dental professionals. This product effectively reduces polymerization time on various light-cured materials and provides excellent treatment results.
     
    The  S.P.E.C. 3 defines performance without compromise. Chair time can be effectively reduced due to rapid and deep polymerization on various light cured materials. The spec 3 features multiple curing modes (3K, Standard, Ortho) for maximum functionality in any clinical situation. The sealed construction of the spec 3s aluminum body ensures quick and easy disinfection between patients. The powerful Lithium Polymer Battery offers enough storage capacity to perform over 300 ten second cures between charges.

    Multiple modes :

    • Standard Mode: Ideal for most composite curing scenarios.
    • 3K Mode: For rapid curing when time is an issue, like pedo or patients with gag reflex.
    • Ortho Mode: Cures an entire full-arch of brackets with 2 three second intervals per bracket.

    HIGH INTENSITY

    • Standard Mode : 2mm Cure in 5 seconds
    • 3K Mode : 2mm cure in 1 second

    Key Specifications

    Wavelength output : 430 nm ? 490 nm

    Power Supply :

    • Input: 100V ? 240V AC / 50 ~ 60 Hz
    • Output: 6V DC, 2.5A

    Dimensions :

    • Component – S.P.E.C. 3® Curing Light
    • Handpiece – 174.5 × 24.8 (mm)
    • Power Adapter – 47 × 87 × 32 (mm),
    • Charger Base – 136 × 86 × 60 (mm),
    • AC Power Cord – 1.3m
    • Intensity of irradiation Standard Mode: 1,600 mw / cm2 ± 10%
    • Intensity of irradiation Mode 3K and Ortho: 3,000-3,500 mw / cm2
    • Packaging

    • 1 x LED curing light
    • 1 x Charger Base
    • 1 x Power Adapter
    • 1 x Instruction Guide
    • 1 x Eye Shield
    • 1 x Composite curing test block
    • Direction of use

      Installation procedure :

      • Gently insert the light guide into the opening on the handpiece. When light guide is fully inserted, approximately 1mm of the metal ring will be exposed.
      • Place the barrier sleeve over the curing light. Put the eye shield over the end of the light guide drawing the barrier sleeve taut.
      • Plug the AC power cord into the receptacle in the power adapter.
      • Connect the S.P.E.C. 3® LED Charger Base to the power adapter. Insert the plug on the power adapter completely into the wall electrical outlet.
      • Keep the handpiece on the charger base when not in use.

      Powering ON and OFF :

      • The battery charge level display: Three green lights indicate a fully charged LED curing light. One or two green lights indicate the curing light is not fully charged. The unit beeps one time after displaying the battery charge level indicating the LED is ready to use.
      • Power ON: Press the Shot switch or the Mode switch to activate the S.P.E.C 3® Curing Light.
      • Power OFF: S.P.E.C. 3® LED Curing Light turns off automatically after 5 minutes if no operation is detected (Sleep mode).
      • If the curing light is in ?Sleep? mode, pressing any switch will ?awaken? the light to the curing mode last used.

      Basic Controls :

      • Mode switch: Press the Mode switch quickly to select various time
        settings. Press and hold the Mode Switch for 3 seconds to switch between curing modes. Two beeps are emitted.
      • Shot switch: Press the Shot switch to start the selected curing program. Press the Shot switch during operation to stop the program in progress.

      Mode selection :

      • 3K Mode / Ortho Mode: When selected, the LED display turns to ORANGE color. The output will be 3000 mW/cm².
      • Standard Mode: When selected, the LED display turns to GREEN color. The output will be 1600 mW/cm². Press and hold the Mode switch for 3 seconds to change curing mode (GREEN and ORANGE light changes alternately).
      • FAQs

        Q. If the Shot or Mode button doesn?t light up.

        • Removing the battery pack and reinserting it will reset the device to its original factory settings. On the base of the handpiece, remove the two miniature screws
          with the enclosed phillips head screw driver provided. Slide the battery pack out of the handpiece and reinsert it, replacing the two miniature screws.
        • Place the handpiece on the charger base to recharge until the red light changes to the green illuminated light indicating a fully charged curing light. This will resolve a low-power problem.

        Q. If the Shot or Mode button lights up but doesn?t work properly.

        • The curing light may be discharged and needs recharging.
        • Place the handpiece on the charger base to recharge until the red light changes to the green illuminated light indicating a fully charged curing light.
        • If the curing light does not activate, the unit requires service. Please contact your supplier or authorized service center.

        Q. Is this item autoclavable ?
        A. The handpiece is not autoclavable. Do not sterilize the handpiece by immersion or heat sterilization such as dry heat, steam under pressure, or unsaturated chemical
        vapor (fiber-optic light guide and light shield can be autoclaved)

        Warranty

        • Manufacturer/Importer warranty of 24 months as applicable for this product.
        • Service and Warranty are handled by the manufacturer/importer directly for this product
        • Divne Medicare will not be liable to replace the Products and the liability to replace any such Product is that of the Manufacturer/Importer
        • Divne Medicare and the Buyer acknowledge that the Products purchased/usedare a subject matter of original Manufacturer/Importer?s warranties only
        • Any or all claims in relation to returns and replacement shall be made to the concerned Manufacturer/Importer only and Divne Medicare may assist the customer in registering a request to get the Product replaced or serviced.
        • The Buyer acknowledges that the Products once sold will not be exchanged or taken back unless the seal of the package or the Product is intact or not altered in any manner or is not tampered as the case may be.

      1. We offer Worldwide Shipping by Courier via Air or Sea mode.
      2. Product will be dispatched within 5-7 working days.
      3. Delivery will take a maximum of 7-15 days, based on the shipping option you choose.
      4. Kindly check customs restrictions and rules in your country for specific products, mostly 99% shipments are cleared and delivered smoothly.
      5. For Bulk inquiries or customized manufacturing please contact us.

      Product Enquiry

    Categories
    My Cart
    Close Wishlist
    Close Recently Viewed
    Categories

    Wait! Don't Miss Out on Your Perfect Cart 🛒💫

    We noticed you left something amazing in your cart! 🎁✨ Don't let it slip away – just one step away from checkout bliss! 🛍️ 💥 Save 10% off your entire purchase today – use code SAVE10 at checkout! 💥 Hurry back and complete your order now! Time's running out! ⏳🏃‍♂️

    Click to Chat!
    Scan the code
    GEE - I have a question about Coltene Spec 3 LED Curing Light - https://gloriaexports.com/product/coltene-spec-3-led-curing-light/?add-to-cart=86103&v=06fa567b72d7