Eighteeth Medical E-connect S Endomotor

Direction to Use

Power On and Off:

• To turn on the device, press and hold the power button for more than 0.5 seconds.
• To power off the device, hold down the power button and follow the specified procedure.

Operation Modes:

• Confirm that the selected operation mode (FWD, REV, REC, ATC) is appropriate for the specific dental procedure.
• Use the “<” or “>” buttons to adjust and customize operation mode settings if needed.

Speed and Torque Settings:

• Adjust the speed setting within the range of 120 rpm to 1000 rpm.
• Adjust the torque setting from 0.5 N·cm to 4.0 N·cm, with the option for torque reverse less (R.L).

Apex Locator and Apical Action:

• Utilize the integrated apex locator for real-time feedback on file positioning.
• Customize apical action settings, such as Reverse, SlowDown, Stop, or Off, as needed.

Preset Programs:

• Access preset programs for common file systems by long-pressing the designated button during standby state.
• Change parameters within preset programs for customization.

Auto Stop and Apical Reverse:

• Enable or disable the auto-stop function when the endo file is out of the root canal.
• Adjust apical reverse settings for precise control during length determination.

FWD and REV Angle Adjustment:

• Adjust the forward angle (FWD Angle) and reverse angle (REV Angle) during REC and ATC operation modes for optimal control.

Software Update:

• Easily update the software without additional tools by holding down the “S” button and pressing during the power-off state.

Safety Precautions:

• Always follow the safety guidelines outlined in the device manual.
• Ensure proper sterilization of components between uses.

Contact Distributor for Support:

• For any software updates or technical assistance, contact your distributor.