Unicorn Sealing Machine

Direction to Use

Following the cleaning and sanitizing process using an ultrasonic cleaner, each instrument must be packaged and sealed appropriately.

• The contents must not take up more than 3/4 of the total volume of the package.
• A 3cm gap should be left between the instruments and the seal.
• To make it easier to open, leave a 1-cm gap between the seal and the paper’s edge.
• Any instruments in pouches with plainly burned or uneven seals must be repacked.
• To start the packaging process, insert the end of the sterilization package into the sealing device with the paper side facing downwards. the handwheel of the sealing machine enables you to adapt to the desired length easily. Press the lever of the sealing machine downward to generate the seal seam. 
• During the sealing procedure, move the blade handle from one side to the other to cut off the desired length. Press the lever upwards and remove the pouch, which is open to one side.
• In the next step, place the instrument in the pouch. Ensure that the instrument is dry and free of soiling. 
• The use of protective caps on pointed instruments prevents damage to the sterilization package.
• To finish packaging, slide the unsealed side of the pouch into the sealing device from the front. Then perform the sealing procedure again.
• The arrow on the foil indicates the direction in which you need to open the pouch.