Anabond Endoprep – Rc

STEP 1: After access cavity preparation remove the pulp and flush canal with sodium hypochlorite solution.

STEP 2: Dispense?nabond Endoprep-Rc either directly from the unit dose applicator?o a?appen dish and carry to the canal by coating a small hand file or from the syringe with the?nabond Endoprep-Rc syringe tip?n and around the canal orifice.

STEP 3:?he sodium hypochlorite will react with the?nabond Endoprep-Rc and begin to effervesce or bubble.

PLEASE TAKE?OTE OF THE BUBBLING REACTION.

STEP 4:?sing a small hand file, mix?he?nabond Endoprep-Rc and sodium hypochlorite in the canal.

STEP 5:?ently irrigate and evacuate with sodium hypochlorite.

STEP 6: Coat the first file in the rotary file technique with?nabond Endoprep-Rc and use to desired depth.?nabond Endoprep-Rc will now act?s a file lubricant while instrumenting the canal with a rotary instrument.

STEP 7: Repeat step 6 for each step in the crown-down technique sequence until canal shaping and cleaning is?ompleted.

NOTE:?rrigate and evacuate using sodium hypochlorite to remove Anabond Endoprep-Rc?ixture and dentinal debris?rom canal after every 2 files in the rotary file sequence.

STEP 8: Once shaping is completed, thoroughly flush and evacuate canal using H2O to remove all irrigants. Dry?anal and obturate.