16 results

  • Sort by
    ...
Filters
Price
Categories
  • -30%Limited
    SDI Aura Bulk Fill
    SDI Aura Bulk Fill Original price was: €27.33.Current price is: €19.10.

    Natural-looking finish with just one universal shade, High depth of cure without the need for a capping layer, Easy placement in a matter of seconds, The waxy consistency is packable and non-stick to optimize handling, Low volumetric shrinkage(2.21%)-aura bulk fill delivers reduced stress to provide long lasting restorations, Excellent flexural strength(115MPa)-aura bulk fill resists major deformations without fracturing, High compressive strength(375MPa)-aura bulk fill resists the high forces of compression in the mouth.

  • -16%Limited
    SDI Conseal F Pit & Fissure Sealant
    SDI Conseal F Pit & Fissure Sealant Original price was: €9.84.Current price is: €8.22.

    Releases fluoride?onseal f combines the proven SDI sealant technology with an intensive initial fluoride boost in conjunction with long term fluoride treatment. The unique Conseal f filler component, with its blend of particles and high surface-to-area volume ratios, enables high fluoride release. Fluoride enhances caries prevention, remineralization, and the inhibition of enamel demineralization.Lowest viscosityConseal f is the lowest viscosity sealant. The ideal low viscosity allows Conseal f to fl ow faster and deeper into the prepared pits and fi ssures. A recognized cause of pit and fi ssure sealant failure is an inability to seal. The tighter seal optimizes Conseal f?s mechanical retention and eliminates the space required for bacteria to grow. Conseal f?s tight seal is further enhanced by its unique UDMA resin system?s lower shrinkage and by being BIS-GMA free, avoiding the controversy of Bisphenol A.Low viscosity Super Etch LVSDI has created a specialized blue gel 37% phosphoric acid etchant for sealants, in a direct delivery system. Super Etch LV?s lower viscosity improves the acid?s surface contact for deeper etchant penetration into the pits and fi ssures. The deeper acid penetration strengthens the mechanical bond and the retention success of Conseal f sealants.Deepest penetrationConseal f is available in direct placement syringes and single dose complets. Both have pre-bent, superfi ne dispensing tips which facilitate controlled, direct extrusion for faster procedures and allow direct dispensing into previously diffi cult to reach areas. The Conseal f nozzle, one third the size of other brands, enhances complete sealing and retention by allowing penetration into the deepest pits and fi ssures; crevasses that will not admit the dispensing tips of other materialsRange of colorsConseal f is available in opaque white. Conseal is available in clear and light greyHygienic placementThe Conseal f complets offer a direct and hygienic way of dispensing the sealant, eliminating the risk of cross contaminationBio compatibleConseal f?s low water solubility minimizes breakdown of the sealant in the oral environment.Contains fillerConseal f is 7% fi lled with a submicron fi ller size of 0.04 microns to withstand surface wear.Clinically provenConseal pit and fi ssure sealants are clinically proven. 5,363 Conseal sealants placed in 774 children found no failures due to the material and established that ?sealants contribute signifi cantly to dental public health

  • SDI Riva Light Cure Glass Ionomer Cement 100.82

    Combination of GIC advantages and composite advantagesRiva Light Cure is a light-cured, resin-reinforced glass ionomer restorative cement. Glass ionomers release fluoride and chemically bond to the tooth structure whilst composites have excellent aesthetics. Riva Light Cure is a combination of both with excellent aesthetics, fluoride release and it chemically bonds to the tooth structure.Non-stick handlingRiva Light Cure HV can be manipulated immediately after mixing. It is a very sculptable material. It does not stick to instruments and resists any initial threading traditionally found with a light cured GIC. Riva Light Cure HV does not lift off after placement, particularly in the maxillary position.Fabulous aestheticsRiva Light Cure?s translucency ensures aesthetics are maximised to enable natural looking restorations with chameleon effects. ?Riva Light Cure is the most translucent of the RMGIs tested?Great marginal adaptationRiva Light Cure is the answer to long term microleakage prevention. Use it as a restorative or a base under permanent restorations. ?…light-cured and self-cured glass ionomer bases were more effective in reducing microleakage in both the occlusal and proximal cavo surfaces than a flowable resinProprietary Bioactive technologyRiva Light Cure utilises SDI?s proprietary ionglass? filler developed by our glass technologists. ionglass? is a radiopaque, high ion releasing, bioactive glass used in SDI?s range of glass ionomer products. Riva Light Cure releases fluoride to assist with remineralisation of the natural dentition.BPA freeRiva Light Cure does not contain any Bisphenol A (BPA) or its derivatives. Use this product with confidence and peace of mind.Highest colour stabilityRiva Light Cure has excellent resistance to common stains such as black tea and red wine. Riva Light Cure absorbs about half as much color from these tannin-rich solutions.Long term wear resistanceThe surface hardness of resinreinforced glass ionomer cements means good long-term wear resistance. The greater the surface hardness, the greater the resistance to permanent surface indentation.Orange light safe tipRiva Light Cure?s capsule has a transparent orange nozzle. This protects the paste from curing under operating light in between placement.Simple procedureRiva Light Cure is quick and simple to place. No bonding procedure is required. It chemically bonds to the tooth and provides ion exchange to demineralised dentition.High flexural strengthHigh flexural strength ensures reduced cracking and failure in flexion. Riva Light Cure has excellent flexural strength.

  • SDI SeT PP 50 Capsules Shade A2 60.39

    High fluoride releaseSeT?s free movement of fluoride provides benefits to the tooth. Fluoride plays several significant roles in any caries-prevention program. These include the formation of fluorapatite, which is more acid-resistant than hydroxyapatite. Fluorapatite is harder than other tooth minerals. It helps to provide protection from tooth decay.Fast and easySeT is an all-in-one luting cement. It etches, bonds, and fills with just one component. Simply apply seT and seat your restoration. seT produces a low film thickness and fluidity to seat cemented restorations.RadiopacityDetectable on x-ray radiographs, seT is great for recalls when margins are regularly checked for integrityMinimal to no postoperative sensitivitySeT does not require separate etching and washing. The smear layer remains intact to protect the tooth. This dramatically reduces, if not eliminates, post-operative sensitivityChoice of delivery tipsSeT PP syringes can be adapted for a variety of delivery options. The regular mixing tips are predominantly used for dispensing into crown and bridge. In conjunction with a wide mixing tip, endodontic and intraoral tips are also available.Dual cureDesigned to combine the advantages of light curing and self-curing, seT is the ideal luting cement for most of your cementation needsNo Bisphenol A or HEMASeT does not contain any Bisphenol A (including its derivatives) or HEMA. Use this product on your patients with confidence and peace of mind.

  • -47%Limited
    SDI Stae Bond 5ml
    SDI Stae Bond 5ml Original price was: €32.79.Current price is: €17.23.

    One bottle systemStae combines both primer and adhesive in one bottle to simplify the technique and decrease patient chair time.Fluoride releaseFluoride?s cariostatic effect enhances remineralization and inhibits enamel demineralization. In an aqueous environment, the fl uoride ions in Stae diffuse from the resin into the surrounding tooth. This ionic movement is caused by oral fl uid passing in and out of the resin and tooth, acting as a carrier for the fl uoride ions.Non Bis-phenol A Stae avoids the Bis-phenol A hormonal imbalance controversy, as it does not contain the related BisGMA resin.Bonds to moist and dry tooth surfacesStae?s carrier solvent is a mixture of acetone and water. The acetone carries Stae deep into the demineralized dentin and the water re-moistens any dry dentin. High bond strengthStae?s complete hybridization of the resin into the demineralized dentin results in high bond strength.

  • Sdi Wave Flowable Composite 7.78

    NanofilledWave, Wave MV and Wave HV contain specially treated nano-fi llers to maximize polishability, wear resistance and strength. Ease of extrusion is improved with the addition of these specially treated nano-fi llers.Filler loadingWave, Wave MV and Wave HV all have excellent wear profi les due to their high fi ller loading level:Fluoride releaseFluoride?s cariostatic effect enhances remineralization and inhibits enamel demineralization. In an aqueous environment, the fl uoride ions in Wave, Wave MV and Wave HV diffuse from the resin into the surrounding tooth. This ionic movement is caused by oral fl uid passing in and out of the resin and tooth, acting as a carrier for the fl uoride ions.Natural fluorescenceWave, Wave MV and Wave HV contain a fl uorescent agent that ensures perfectly natural looking teeth under ultraviolet lights. No one will know!RadiopacityWave, Wave MV and Wave HV are all visible on x-rays. This allows easy identifi cation of secondary caries at the interface.Compressive strengthWave?s, Wave MV?s and Wave HV?s high compressive strength values expand the suitability for multiple applications.UDMAWave?s UDMA resin system minimizes shrinkage and reduces post operative sensitivity.Tip length comparisonWave?s complet tip length is 12.2mm, 40% longer than the alternative of 8.7mm. Wave?s longer tip length allows more direct placement of the material into diffi cult to reach areas.

  • -21%Limited
    Sdi Wave Flowable Composite A1
    Sdi Wave Flowable Composite A1 Original price was: €9.84.Current price is: €7.78.

    NANOFILLEDWave, Wave MV, and Wave HV contain specially treated nano-fillers to maximize polishability, wear-resistance and strength. Ease of extrusion is improved with the addition of these specially treated nano-fillers.FILLER LOADINGWave, Wave MV, and Wave HV all have excellent wear profiles due to their high filler loading level:FLOURIDE RELEASEFluoride?s cariostatic effect enhances remineralization and inhibits enamel demineralization. In an aqueous environment, the fluoride ions in Wave, Wave MV, and Wave HV diffuse from the resin into the surrounding tooth. This ionic movement is caused by oral fluid passing in and out of the resin and tooth, acting as a carrier for the fluoride ions.NATURAL FLORESCENCE?ave, Wave MV, and Wave HV contain a fluorescent agent that ensures perfectly natural-looking teeth under ultraviolet lights. No one will know!RADIOOPACITY?ave, Wave MV, and Wave HV are all visible on x-rays. This allows easy identification of secondary caries at the interface.COMPRESSIVE STRENGHTWave?s, Wave MV?s and Wave HV?s high compressive strength values expand the suitability for multiple applications.UDMAWave?s UDMA resin system minimizes shrinkage and reduces post-operative sensitivity.TIP LENGHT COMPARISIONWave?s complete tip length is 12.2mm, 40% longer than the alternative of 8.7mm. Wave?s longer tip length allows more direct placement of the material into difficult to reach areas.

  • -21%Limited
    Sdi Wave Flowable Composite A2
    Sdi Wave Flowable Composite A2 Original price was: €9.84.Current price is: €7.78.

    NANOFILLEDWave, Wave MV, and Wave HV contain specially treated nano-fillers to maximize polishability, wear-resistance and strength. Ease of extrusion is improved with the addition of these specially treated nano-fillers.FILLER LOADINGWave, Wave MV, and Wave HV all have excellent wear profiles due to their high filler loading level:FLOURIDE RELEASEFluoride?s cariostatic effect enhances remineralization and inhibits enamel demineralization. In an aqueous environment, the fluoride ions in Wave, Wave MV, and Wave HV diffuse from the resin into the surrounding tooth. This ionic movement is caused by oral fluid passing in and out of the resin and tooth, acting as a carrier for the fluoride ions.NATURAL FLORESCENCE?ave, Wave MV, and Wave HV contain a fluorescent agent that ensures perfectly natural-looking teeth under ultraviolet lights. No one will know!RADIOOPACITY?ave, Wave MV, and Wave HV are all visible on x-rays. This allows easy identification of secondary caries at the interface.COMPRESSIVE STRENGHTWave?s, Wave MV?s and Wave HV?s high compressive strength values expand the suitability for multiple applications.UDMAWave?s UDMA resin system minimizes shrinkage and reduces post-operative sensitivity.TIP LENGHT COMPARISIONWave?s complete tip length is 12.2mm, 40% longer than the alternative of 8.7mm. Wave?s longer tip length allows more direct placement of the material into difficult to reach areas.

  • -20%Limited
    Sdi Wave Flowable Composite A3
    Sdi Wave Flowable Composite A3 Original price was: €9.76.Current price is: €7.78.

    NANOFILLEDWave, Wave MV, and Wave HV contain specially treated nano-fillers to maximize polishability, wear-resistance and strength. Ease of extrusion is improved with the addition of these specially treated nano-fillers.FILLER LOADINGWave, Wave MV, and Wave HV all have excellent wear profiles due to their high filler loading level:FLOURIDE RELEASEFluoride?s cariostatic effect enhances remineralization and inhibits enamel demineralization. In an aqueous environment, the fluoride ions in Wave, Wave MV, and Wave HV diffuse from the resin into the surrounding tooth. This ionic movement is caused by oral fluid passing in and out of the resin and tooth, acting as a carrier for the fluoride ions.NATURAL FLORESCENCE?ave, Wave MV, and Wave HV contain a fluorescent agent that ensures perfectly natural-looking teeth under ultraviolet lights. No one will know!RADIOOPACITY?ave, Wave MV, and Wave HV are all visible on x-rays. This allows easy identification of secondary caries at the interface.COMPRESSIVE STRENGHTWave?s, Wave MV?s and Wave HV?s high compressive strength values expand the suitability for multiple applications.UDMAWave?s UDMA resin system minimizes shrinkage and reduces post-operative sensitivity.TIP LENGHT COMPARISIONWave?s complete tip length is 12.2mm, 40% longer than the alternative of 8.7mm. Wave?s longer tip length allows more direct placement of the material into difficult to reach areas.

  • -17%Limited
    Sdi Wave Flowable Composite MV Shade A3.5
    Sdi Wave Flowable Composite MV Original price was: €9.37.Current price is: €7.78.

    NanofilledWave, Wave MV and Wave HV contain specially treated nano-fi llers to maximize polishability, wear resistance and strength. Ease of extrusion is improved with the addition of these specially treated nano-fi llers.Filler loadingWave, Wave MV and Wave HV all have excellent wear profi les due to their high fi ller loading level:Fluoride releaseFluoride?s cariostatic effect enhances remineralization and inhibits enamel demineralization. In an aqueous environment, the fl uoride ions in Wave, Wave MV and Wave HV diffuse from the resin into the surrounding tooth. This ionic movement is caused by oral fl uid passing in and out of the resin and tooth, acting as a carrier for the fl uoride ions.Natural fluorescenceWave, Wave MV and Wave HV contain a fl uorescent agent that ensures perfectly natural looking teeth under ultraviolet lights. No one will know!RadiopacityWave, Wave MV and Wave HV are all visible on x-rays. This allows easy identifi cation of secondary caries at the interface.Compressive strengthWave?s, Wave MV?s and Wave HV?s high compressive strength values expand the suitability for multiple applications.UDMAWave?s UDMA resin system minimizes shrinkage and reduces post operative sensitivity.Tip length comparisonWave?s complet tip length is 12.2mm, 40% longer than the alternative of 8.7mm. Wave?s longer tip length allows more direct placement of the material into diffi cult to reach areas.

  • -17%Limited
    Sdi Wave Flowable Composite MV Shade A3
    Sdi Wave Flowable Composite MV Shade A3 Original price was: €9.37.Current price is: €7.78.

    Class V restorations, Tunnel/air abrasion preparations, Pit and fissure sealants, Minimal Class I, II, III, IV restorations, Radiopaque cavity liners, Cervical abrasion/erosion lesions, Abfraction lesions, Implant seals, Incisal abrasions, Repair enamel defects, Minor core build-ups, Temporary crowns, Cement porcelain/ceramic/ composite veneers, Splint mobile teeth, Attach fiber bridges, Restorations in deciduous teeth, Repair porcelain restorations, Block out undercuts in inlay/onlay/crown preparations, Cover stains, Adhering tooth jewelry, Ceramic inserts

  • -17%Limited
    Shofu Acrylic Contouring And Finishing Kit
    Shofu Acrylic Contouring And Finishing Kit Original price was: €158.54.Current price is: €131.64.

    The Acrylic Contouring & Finishing Kit was specially developed for the adjustment of acrylic dentures chairside and in the laboratory. Designed for adjustment and polishing of acrylic dentures and appliances chairside or in the laboratory. It contains the necessary rotary instruments for the following steps:, Reduction/Adjusting – Robot Carbide Cutter. Contouring – AcryPoint – dark grey, coarse. Finishing/Prepolishing – AcryPoint – brown, medium. Gloss Polishing – AcryPoint – light grey, fine.

  • Shofu Amalgam Polishing Kit Airotor (Fg)

    These autoclavable silicone polishers have a long track record and are well known for their efficiency and durability, Recommended average speed for Brownie, Greenie & SuperGreenie Polishers: 5,000 to 7,000 rpm (maximum speed of 30,000 rpm), Provides fast, brilliant results without pumice or tin oxide, Cups are for proximals and mini-points are for occlusals, Brownies for pre-polishing, Greenies for polishing, Supergreenies for super-polishing, Contra-Angle and Friction-Grip kits, Your choice of a sterilizable bur block or plastic kit, Use Amalgam Polishing kit for:, amalgams and precious alloys

    Out of stock

My Cart
Wishlist
Recently Viewed
Categories