Anand MB – 36 Suction Unit Ms Body (Mild Steel) – 25Ltr


9 sold in last 19 hours
Hurry! Over 11 people have this in their carts
Brand: Anand

MS Housing:,  MS Powder Coated, SS Top on two wheels. Vacuum Gauge:,  2.5 inches round vacuum gauge, Pump:,  A single head rotary vane pump

Bulk Inquiry
  ... people are viewing this right now

Guaranteed & Safe Checkout by


  • MS Housing: MS Powder Coated, SS Top on two wheels.



  • Vacuum Gauge: 2.5 inches round vacuum gauge



  • Pump: A single head rotary vane pump



A smaller version of our suction series for use in surgical procedures where fast vacuum build-up is required.

This suction unit is highly recommended to be used in dental clinics & for minor surgeries


  • Minor OT?s
  • Intensive Care Unit
  • Emergency Department
  • Wards
  • Dental Clinics
  • Key Specifications


    HousingMS powder coated,Ss top on two wheels
    Max. Vacuum / LPM-700 mm Hg, 25 Ltrs / min
    Pump TypeSingle Rotary Vane Pump
    Jars2 x 2 Ltrs. PC Jar
    FilterTrap Filter
    Tubing8 mm ID x 2 mtr. (PVC)
    Vacuum Gauge6.5 cm dia 0-760 mm Hg
    Power Supply220 V AC, 50 / 60 Hz, 180 Watt
    Noise Level55 dB A ± 3
    Dimensions43 x 30 x 62 cms
    Net Weight24 Kg
    Overflow SafetyMechanical


  • 1 x Suction unit
  • 2 x 2Ltr Jar
  • Direction of use

    Motorised pump is housed in the cabinet. On the platform, apart from the oil container, is a filter which is the suction inlet. To faster it well with the base, four black hexa bolts (used as hold fast for transportation at the bottom of the unit) MUST be removed by rotating anticlockwise with the aid of a simple handtool.

    Before the unit is put on, please see that:

    • The plug is connected to the grounded relevant mains outlet. In case of fluctuation, use voltage stabilizer.
    • The vacuum control knob is not loose. It must be fully tightened clockwise.
    • The lids are tightly placed on the jars and the tube on the nozzle of the lids.
    • The oil container is full with lubrication oil No. 40. So that there is no leakage at the nozzle-connector joint, press and twist the connector to make it snug fit. Same way while unplugging, twist and pull.


    • The unit can overheat if it is restarted while under vacuum. Make sure it is between 0 and 150 mm Hg
    • Always turn the power off with the power switch after job is complete or, in case of breakdown, in between the use.
    • FAQs

      Can we use this Suction Unit at Hill stations or areas of high altitude?

      •  Yes, these suction units can be used at hill stations or areas of high altitude however, due to high atmospheric pressure,  the vacuum pressure gets reduced. So we recommend you to buy a high power suction machine if you are willing to use them at high altitudes

      The specified maximum vacuum refers to sea level. According to local conditions, and barometric
      pressure, slight deviations in vacuum reading may be noted. As a reference, the table below shows
      several factors by which the indicated maximum vacuum value must be multiplied, according to the
      altitude of location where the measurement is carried out


      Location/Maximum Vacuum    
      LocationSea level1000m2000m4000m


      Why did my suction unit made a beep sound?

      • The beep sound is an indication that the suction machine needs to be stopeed & the suction jar needs to be emptied
      • These suction units have been pre-designed with an alarming beep sound for the operator as they protect the suction machine from any harm

      Can we use this suction machine for major surgeries where it requires to work for 3-4 hours constantly?

      • No, we dont recommend to use the suction machine for a longer time. Kindly set the machine in a non-working mode for 10-15mins to avoid heating up of the electric motor or to avoid any further damage to the suction unit.

      Can we use this suction machine under 110V?

      • Yes, the suction machine can be used under 110V by using an adapter/ converter

      How far can i can keep the suction unit from my dental chair? or I have 2 dental chairs in my dental clinic, can i use the suction from one position at the clinic?

      • Suction power of the suction units decreases as the distance increases. It is recommended to keep the suction unit as close as possible to the dental chair
      • Warranty

        • Manufacturer/Importer warranty of 1 Year against manufacturing defect
        • Service and Warranty are handled by the manufacturer/importer directly for this product
        • Divne Medicare will not be liable to replace the Products and the liability to replace any such Product is that of the Manufacturer/Importer
        • Divne Medicare and the Buyer acknowledge that the Products purchased/usedare a subject matter of original Manufacturer/Importer?s warranties only
        • Any or all claims in relation to returns and replacement shall be made to the concerned Manufacturer/Importer only and Divne Medicare may assist the customer in registering a request to get the Product replaced or serviced. 
        • The Buyer acknowledges that the Products once sold will not be exchanged or taken back unless the seal of the package or the Product is intact or not altered in any manner or is not tampered as the case may be.

    1. We offer Worldwide Shipping by Courier via Air or Sea mode.
    2. Product will be dispatched within 5-7 working days.
    3. Delivery will take a maximum of 7-15 days, based on the shipping option you choose.
    4. Kindly check customs restrictions and rules in your country for specific products, mostly 99% shipments are cleared and delivered smoothly.
    5. For Bulk inquiries or customized manufacturing please contact us.

    Product Enquiry

Close My Cart
Close Wishlist
Close Recently Viewed
Click to Chat!
Scan the code
GEE - I have a question about Anand MB - 36 Suction Unit Ms Body (Mild Steel) - 25Ltr - https://gloriaexports.com/product/anand-mb-36-suction-unit-ms-body-mild-steel-25ltr/