BPL Accudigit Infrared Digital Thermometer – Dual Mode 91MED120

The Infrared Digital Dual Mode Thermometer enables the quick detection of body temperature from 2 modes Forehead & Ear
The temperature readings are acquired within 0.5 seconds of the use of the device
The dual mode thermometer is capable of storing up to 20 sets of measurement readings
The Infrared digital thermometer has a biolour backlit LCD screen
The thermometer shuts down within 10 seconds when not in use
The BPL Accudigit Infrared Digital Thermometer has a fever alarm function for temperature test
It is a non contact thermometer
Technical Specifications:
Models: Dualode infrared thermometer
Applicable regulations and laws: ASTM 1965/EN12470/GB/T 19146010
Temperature units: 0C/ oF, adjustable
Measurement range: Forehead temperature mode: 320C2.20C / 89.6oF 107.9 oF; Ear temperature mode: 0.00C00.00C /32.0oF 212.0 oF
Precision: .20C /.4oF
Display resolution: 0.10C /0.1oF
Latency Time: 1 second
Sound: volume> 50 db (the perpendicular distance from dB Volume sensor to thermometer is 10cm)
Automatic shutdown function: 10ss
Lowoltage display function: The product shall display lowoltage signal if the voltage is below 2.51V.15V
Memory function: Memorize 20 groups of measured temperature
LED backlit specifications: > 1.2cd/m2
Operational conditions: ASTM 100C00C (500F040F)/155%RH
Type of measuring: Applicable for forehead temperature and ear temperature
Battery: Changeable for two 1.5V triple AAA batteries
Battery life: More than 3000 times
Thermometers are used to measure fever in humans or tell you how cold it is outside. Made up of thermo (heat) and meter (measuring device), the meaning of the word thermometer is straightforward. Thermometers measure temperatures in degrees, according to either the Celsius or Fahrenheit system.
Digital thermometers are temperatureensing instruments that are easily portable, have permanent probes, and is equipped with a convenient digital display. The way a digital thermometer works depends upon its type of sensor. Sensor types include resistance temperature detector (RTD), thermocouple and thermistor.
One can use any thermometer, with mouth open, put the end with the red, blue, or silveroloured tip under your tongue. Close your lips gently around the thermometer. Do not bite the glass thermometer.
Cleaning of the thermometer is also important. It’s important to clean the thermometer after each use, but how you clean it depends on what type of thermometer you have. For glass thermometers, wash it with soap and cool water, then rinse and dry. For digital thermometer you can wipe it with a cloth soaked in alcohol or water. Allow it to air dry.