Features
- Glass Ionomer formulation
- No etching or bonding needed due to strong chemical adhesion
- Fluoride release
- High mechanical strength
- Excellent wetting properties
- Sharp-set characteristics
- Low solubility
- Long term clinical data.
Description
Bio Glass Gold is a glass ionomer cement for restoration of primary teeth,restoration of class III, V and limited class I cavities. This dental material has good adhesive bond properties to the tooth structure, allowing it to form a tight seal between the internal walls of the tooth.
- Allows minimal cavity preparation
- Less stress on margins and marginal seal
- Protects against secondary caries
- Promotes internal remineralization and surface strengthening
- Easier mixing and fast setting makes iteasy to use
- Good colour match to tooth structure
- More durable, longer lasting restorations
Indications : Restoration of primary teeth, restoration of class III, V and limited class l cavities
Contraindications : 1. Pulp Capping 2. In rare cases, the product may cause sensitivity to some persons. If such reactions are experienced, discontinue the use of product and refer to a physician.
- Powder : Fluoro alumina silicate glass
- Liquid : Polyacrylic acid liquid normal viscosity
- Shelf Life : 3 years from the date of manufacturing.
- Presentation : Powder 20g, Liquid 16ml
- Shade : A2
- Mixing Time : 35 sec
- Setting Time : 2 min
- Compressive Strength : 100 MPa
Packaging
- 1 x 20 gPowder
- 1 x 16 mlLiquid
- 1 x Spoon
- 1 X Mixing Pad
- 1 x Instructions Manual
Direction to Use
- Shake the powder bottle well every time before use.
- Dispense one scoop of powder and two drops of liquid on to the mixing pad (The standard powder to liquid ratio is 0.19:0.07)
- With a plastic spatula, divide the powder into 2 equal parts.
- Mix the first portion with all of the liquid for 15 seconds, then mix the remaining portion with the paste formed for 20 seconds.
- The total mixing time should be 35 seconds. Transfer cement to the prepared tooth surface using suitable instrument and finish the restoration.
- Allow 1:30 min to 2:00 minfor proper setting.
- Storage Conditions : Store at temperature between 10degrees C to 24degrees C. Close the cap carefully after use. Keep away from moisture. Shelf life not affected after opening if stored in a cool dry place.
Warranty
- Warranty is not applicable for this product.
