EiTi Dispensing Gun

Features

Description

EiTi Dispensing Gun works perfectly to dispense dental adhesive, silicones, and dental impression material for perfect registration of bite. This sturdy device is made of high-quality plastic and consists of a release lever with a plunger, which coordinates simultaneously to load and remove the cartridges dispense the required amount of cartridge type vinyl polysiloxane impression and reline materials

Key Specifications

Ratio :

• 1:4 -?he impression gun is used to discharge the crown & bridge materials from cartridges.
• 1:1/2:1 – The impression gun is used to discharge the impression materials and bite registration materials from cartridges.

Packaging

• 1 x EiTi Dispensing Gun

Direction to Use

• Lift the release lever of the dispenser and pull the piston plunger all the way back into the dispenser.
• Lift the cartridge holder of the dispenser and load the cartridge ensuring that the V-shaped notch on the flange of the cartridge is facing down. Push down the cartridge holder to fix the cartridge.
• Lift the release lever and push the piston plunger forward until it engages into the cartridge.
• Remove the cartridge cap by rotating 1/4 turn anti-clockwise, tilt the cap downward and peel it away from the cartridge. Gently squeeze the dispenser handle to extrude a small amount of material from the two openings at the end of the cartridge. Make sure that base and catalyst come out evenly.
• Align the V-shaped notch on the rim of MIXING TIP II to the V-shaped notch between the cartridge barrels. Push firmly to attach the mixing tip. Then, rotate the colored collar of the mixing tip 1/4 turn clockwise to the end of the cartridge. The dispenser is now ready for use.
• Squeeze the handle several times to extrude the material. After use, do not remove the MIXING TIP II as this will become the storage cap until the next use. When replacing the MIXING TIP II, rotate the collar on the mixing tip 1/4 turn anti-clockwise to align the V-shaped notch on the cartridge. Tilt the mixing tip downward and peel it away from the cartridge.
• Remove and replace the old mixing tip immediately prior to the next use. Before attaching a new tip, gently extrude a small amount of material to ensure that base and catalyst are flowing evenly from both openings. If the materials fail to extrude, remove any hardened materials on the end of the cartridge.
• To replace the cartridge, lift the release lever and retract the plunger fully. Remove the empty cartridge by lifting the cartridge holder and loading a new one into the dispenser.

FAQs

Q. What is an impression dispensing gun?

A. Impression material hand dispense guns are a convenient way to add impression materials to impression trays. Usually made of plastic, these handheld tools attach to a cartridge of impression material and an impression material dispensing tip.

?/div>

Q. What is the advantage of using this dispensing gun ?
A. It offers direct delivery of material while eliminating the need for mixing?ads and messy cleanup.

?/div>

Q. What is the difference between 1:1 & 4:1 Dispensing Gun ?
A. 4:1 Impression gun is used to discharge the crown & bridge materials from cartridges. While 1:1 Impression gun is used to discharge the impression materials and bite registration materials from cartridges.

Warranty

• Manufacturer/Importer has No Warranty?s applicable for this product.
• Divne Medicare and the Buyer acknowledge that the Products purchased/used are a subject matter of original Manufacturer/Importer?s?span class=”il”>warranties?nly
• Any or all claims in relation to returns and replacement shall be made to the concerned Manufacturer/Importer only and Divne Medicare may assist the customer in registering a request to get the Product replaced or serviced.?/strong>
• The Buyer acknowledges that the Products once sold will not be exchanged or taken back unless the seal of the package or the Product is intact or not altered in any manner or has not tampered?s the case may be.

1. We offer Worldwide Shipping by Courier via Air or Sea mode.
2. Product will be dispatched within 5-7 working days.
3. Delivery will take a maximum of 7-15 days, based on the shipping option you choose.
4. Kindly check customs restrictions and rules in your country for specific products, mostly 99% shipments are cleared and delivered smoothly.
5. For Bulk inquiries or customized manufacturing please contact us.

Product Enquiry

Name

Email address

Enquiry