EiTi Polishing Discs Kit

Diameter –12mm

Colours –Blue, Green,Yellow, White

• Blue(Coarse) for Gross Reduction
• Green(Medium) for Contouring
• Yellow(Fine) for Finishing
• White (Superfine) for Polishing

Packaging

• 10 x Gross Reduction Stem Polishing Discs
• 10 x Contouring Stem Polishing Discs
• 10 x Finishing Stem Polishing Discs
• 10 x Polishing Stem Polishing Discs
• 1 x Mandrel

Direction of use

• Remove excess composite and contour the restoration using a fine diamond or carbide bur.
• Accurately open the package with discs to avoid squabbling and mixing of the discs and choose disc for gross reduction of necessary diameter.
• Place disc for gross reduction by gentle pushing of the connector onto preliminary sterilized mandrel until the disc is secure connected (disc must not wobble on mandrel).
• Start polishing at a speed not more than 10000 rpm. (change speed and duration when using disc of another type).
• When the polishing is finished wash away the residuals of polishing.
• Remove the gross reduction disc from mandrel by positioning a thumbnail under the disc connector and pushing the disc away from the mandrel.
• Place disc for contouring by gentle pushing of the connector onto mandrel until the disc is secure (disc must not wobble on mandrel) and repeat procedures 3 4 taking into account changed abrasiveness of the disc).