Endoking Endomotor Contra-angle Handpiece Head 16:1

Direction to Use

Setup:

• Ensure the endomotor is properly set up.
• Connect the handpiece to the endomotor unit securely.

Sterilization:

• If applicable, ensure that the handpiece and accessories are properly sterilized before use.

Inserting Rotary Files:

• Use the appropriate size and type of rotary file compatible with the endomotor.
• Insert the rotary file into the handpiece chuck securely.

Power On/Off:

• Turn on the endomotor.
• Familiarize yourself with the control panel to adjust speed, torque, and other settings.

Setting Parameters:

• Set the appropriate speed and torque parameters based on the procedure and the type of tooth being treated.
• Follow the recommended settings for the specific rotary file being used.

Engaging the File:

• While operating, gently engage the rotary file into the canal.
• Allow the file to work gradually, and avoid excessive force to prevent file separation.

Irrigation:

• Use irrigation to keep the area clean and cool during the procedure.
• Follow the recommended irrigation protocol for your specific procedure.

Monitoring and Adjustments:

• Pay attention to any unusual sounds or vibrations during operation.
• Adjust speed or torque settings based on the tooth and canal characteristics.

Completion:

• Once the procedure is complete, and safely remove the rotary file from the handpiece.

Cleaning and Maintenance:

• Clean and sterilize the handpiece and follow the protocol for optimal handpiece and accessory cleaning procedures.