EndoKing Obturation Pen

Direction to Use

HEAT :

• Press the button to the heat the tip, the LED indicator light Green.
• The tip can reach a working temperature within 3 seconds.

CHARGE :

• Put the obturation pen onto the charging base, the LEd indicator light blue. 
• The unit should be Continuous charging more than 8 hours from low voltage to full charge.

MAINTENANCE AND STERILIZATION:

• Clean and sterilize the pen tip before each treatment.
• The remaining gutta-percha can be cleaned by a cotton swab.
• Clean the exterior of the heating unit and charging base by using a soft cloth moistened with a mild detergent or rubbing alcohol.
• The surface should be sheathed with a plastic barrier to prevent contamination and discoloration.
• Do not use strong disinfectants or those that contain bleach or ammonium chloride to clean the device.
• Do not autoclave the heating unit or charging base.
• After each use, the tips should be sterilized by autoclave for 60 mins at 121 degree Celcius.

NOTE: The temperature of the tip is very high during the surgery, avoid its direct contact to the soft tissue to avoid burns.