GC Soft Liner Denture Relining Material

For the temporary rebasing (relining) of acrylic dentures. Tissue conditioning.

Key Specifications

CONTRAINDICATIONS:

Do not use on patients with known allergies to acrylic resins. In case of allergy, refer to a physician

CLEANING AND DISINFECTING

MULTI-USE DELIVERY SYSTEMS:

To avoid cross-contamination between patients this device requires mid-level disinfection. Immediately after use inspect the device and label it for deterioration. Discard the device if damaged.

DO NOT IMMERSE:

Thoroughly clean the device to prevent drying and accumulation of contaminants.
Disinfect with a mid-level registered healthcare-grade infection control product according to regional/national guidelines.

Packaging

1-1 package:

• 1 x 100g powder
• 1 x 100g (97mL) liquid
• Accessories

Directions to use

1. PREPARATION
a) Clean the contact surface thoroughly using pumice and water and abrade the area to be relined.

2. MIXING
a) The standard powder/liquid ratio is 2.2g/1.8g, (first graduation on powder measure to 4 graduations of the liquid syringe).

Note:
Consistency may be varied by changing the powder/liquid ratio.

b) Measure into the glass jar and mix for 30-60 seconds.

3. RELINING
a) Coat the mixture onto the denture as evenly as possible
b) Insert the denture in the mouth, muscle trim and retain it in the centric occlusal position for 4-5 minutes.
c) Remove and inspect for defects.
d) Dip the denture into cold water, and trim away excess at the periphery with a heated sharp instrument.