Intersurgical Hydro-Trach BVF/HME Filter

The Intersurgical Hydrorach BVF/HME Filter is a heat and moisture exchanger designed for use on tracheostomized patients
The Hydrorach T is an ideal HME product for prolonged use with spontaneously breathing patients
The heat and moisture exchangers filters has a clipped suctioning port accompanied with integral swivel oxygen connector and an occlusion mechanism

Technical Specifications:
Moisture loss: 13.2mg H2O/l
Calculated Moisture Return: 26 mg H2O/I
Resistance at 30L/min: 0.2 cm H20
Resistance at 60L/min: 0.7 cm H20
Compressible volume: 19 ml
Weight: 8 g
Connectors: 15F
Minimum tidal volume: >60 ml
Breathing filters are used to offer outstanding, validated filtration efficiency for use in anaesthesia and intensive care. These filters are designed for the protection of the patient, hospital personnel, and equipment from potential microbial contamination.
Breathing filters and Heat and Moisture Exchangers (HME) help facilitate the normal warming, humidifying, and filtering functions of the upper respiratory tract for a patient undergoing anesthesia or in intensive care. While heat and moisture exchangers regulate the inspired air by preventing the loss of moisture and heat, bacterial viral filters prevent the transmission of hazardous particulate matter and microbes from the surrounding environment into the breathing system.
The use of filters is recommended to reduce the risk of cross-infection during procedures involving anesthesia if the breathing system is used for more than one patient. HME filters also reduce the need for cleaning tubing and equipment, making them more convenient for healthcare personnel when compared to the use of active humidifiers. They are better suited for short-term use (less than or equal to 96 hours) and during patient transfer.
It is recommended to change the filter after each patient. The filters should be changed every 24 hours if used on a single patient for a prolonged period of time.