Niscomed CMS 8000 Multi Parameter Patient Monitor

The Niscomed CMS 8000 Multi Parameter Patient Monitor has a high resolution 12.1colour TFT display

The patient monitor is light in weight, compact and portable
The patient monitoring device allows for 32 second full disclosure waveform review
The patient monitoring machine can store 500 NIBP measurement data which can be recalled as per the requirement
The data and waveforms colour can be adjusted
The patient monitor is equipped with a builtn rechargeable lithium battery
The monitoring system allows a 7eads display of ECG waveforms on the same screen
Technical Specifications for ECG:
5ead or 12ead selectableInput: 5ead: RA; LA; RL; LL; V or R; L; N; F; CLead selection: I; II; III; avR; avL; avF; Vx; CALGain selection: .25,.5,,,autoSweep speed: 12.5mm/s, 25mm/s, 50mm/sAccuracy: bpm or %, whichever is greaterProtection: Withstand 4000V AC/50Hz voltage in isolation against electrosurgical and defibrillationCalibration signal: 1mV%Operation modes: Diagnostic, Monitor, SurgeryHeart rate range: Adult: 1500bpm Paediatric/ Neonatal: 1550bpmMeasurement range: .0mV~2.0mVS detection: YES, Arrhythmia analysis: YESAlarm: YES, audible and visual alarm, alarm events recallable
Technical Specifications for NIBP:
Method: OscillometryOperation modes: Manual/Automatic/STATMeasurement unit: mmHg/KPa selectableGain selection: .25,.5,,,autoMeasurement types: Systolic, Diastolic, MeanMeasurement range: Adult: 1070mmHgOverressure protection: YESResolutionl: 1mmHgAccuracy: The mean error shall be less than mmHg ,the standard deviation shall be less than mmHgAlarm: Systolic,Diastolic,Mean
Technical Specifications for SPO2:
Measurement range: 000%Accuracy: %(70~100%);0~69% unspecifiedAlarm range: 000%
Technical Specifications for Respiration:
Method: RAL impedanceMeasurement range:Adult: 020rpm, paediatric/neonatal:050rpmApnea alarm: YES
Technical Specifications for IBP:
Channel: 2 channelsPressure transducer:Sensitivity: 5( mV/V/mmHg)Transducer sites: ART, PA, CVP, RAP, LAP, ICPAlarm range: 0~300mmHg
Vital signs are an important component of patient care. They determine which treatment protocols to follow, provide critical information needed to make lifeaving decisions, and confirm feedback on treatments performed. Accurate, documented vital signs are a very important part of EMS (Emergency Medical Support) and to monitor the same; Patient Monitoring Systems are manufactured
Patient Monitoring systems are designed to help enhancing the patient care and improve clinical performance. This comprehensive solution fits securely into the hospital’s IT environment to capture timely patient data and feed it securely to the EMR (Electronic Medical Record).
A patient monitor is an electronic medical device that consists of one or more monitoring sensors, a processing component, and a screen display (also called a “monitor”) that provide and record for medical professionals a patient’s medical vital signs like body temperature, blood pressure, pulse rate etc..

Patient monitoring systems are used in hospitals, nursing homes, emergency care centres and health care set ups to monitor and review the vital physiological signs of a patient. Most patient monitoring systems are able to monitor the patient respiration, oxygen saturation in blood, invasive and non invasive blood pressure, electrocardiograph, body temperature etc.. Various sensors and electrodes are used to measure these signs including the ECG electrodes, SpO2 finger sensor, blood pressure cuff, temperature probe etc..