NSK Endo-Mate DT Endomotor

Direction to Use

• Power Connection: Ensure the device is turned off. Connect the AC adaptor to the control unit and confirm that the AC IN lamp lights up, indicating the power supply.
• Preset Memory: Program your desired speed and torque settings into the preset memory. This can be done by selecting the desired settings and pressing the MEMORIZE key. You can store up to 9 different settings.
• Power On/Off: To turn on the device, press and hold the POWER key for more than one second. Briefly pressing the POWER key again will stop the motor handpiece. For intermittent operation, keep the POWER key pressed while the handpiece is running and release it to stop.
• Speed and Torque Adjustment: Fine-tune the rotation speed using the SPEED key and adjust the torque limit value using the TORQUE key.
• Rotational Direction: Select the desired rotational direction by pressing the REVERSE key. Each press of the key alternates between forward rotation and reverse rotation.
• Auto Reverse Function: The AUTO REVERSE key allows you to activate the auto-reverse mode. Press the key to cycle between [AUTO REVERSE AUTO STOP] and [AUTO REVERSE OFF] modes.
• Connecting Contra Angle Head: Align the positioning pins of the contra-angle head with the positioning slots of the motor handpiece. Insert the head until it clicks into place. To remove the head, pull it out axially.
• Mounting and Removing Files: Mounting the file involves inserting it into the chuck until it stops and lightly turning it until it engages with the latch mechanism. Push it inward to click. To remove the file, depress the push button and pull it out.
• Calibration: Calibration helps reduce fluctuation in rotation speed and torque. Lubricate the contra-angle head, turn off the power, connect the AC adaptor, and turn on the power. Simultaneously hold down both SPEED buttons for more than one second.
• Battery Refresh: Battery refresh helps resolve the “memory effect” in Ni-MH batteries. Turn off the power, connect the AC adaptor, and hold down the POWER key while pressing the REVERSE key.