Prevest Mta Plus

Features

Description

MTA Plus is a specialized dental cement based on Di and Tri-Calcium Silicate, derived from advanced material research in inorganic hydraulic powder technology. MTA Plus is indicated for both vital pulp therapy and Endodontics procedures.

INDICATIONS :

Dental procedures contacting vital pulp tissue such as :

• Pulp capping
• Cavity lining
• Pulpotomies

Dental procedures contacting the periradicular tissues such as :

• Root-end fillings
• Apexification
• Perforation repair
• Root resorption
• Sealing
• Obturation (pulpectomy)

CONTRAINDICATIONS:

• Hypersensitivity against caustic (high pH) solutions.

PRECAUTIONS:

• AVOID contact of unset mixed paste with skin or oral mucosa. After incidental contact, wash and rinse with water.
• Wear suitable gloves and protective glasses during use.
• MTA Plus powder and gel must be kept well sealed.
• PROTECT the powder from humidity. Close the container.
• DO NOT contaminate the powder with an unclean or moist instrument.
• DO NOT overfill the root canals when obturating or sealing.

ADVERSE REACTIONS:

• Reversible acute inflammation of the oral mucosa if contacted with the unset paste.

INTERACTIONS WITH OTHER DENTAL MATERIALS:

• None known.

STORAGE:

• Store at room temperature (25?C/75?F); do not refrigerate. Keep bottles tightly closed. Moisture will reduce the shelf life of the powder.

Key Specifications

• Mixing Time : 45 -60 sec.
• Working Time : 25 Min.
• Setting Time : 55 Min 30 Sec
• Film Thickness : 45 m

Packaging

Prevest Mta Plus trial pack- 1gm :

• 1 x Powder Jar 1g
• 1 x Gel Bottle, 2cc
• 1 x Measuring Spoon
• 1 x Instruction Manual

Prevest Mta Plus Intro Pack – 2gm :

• 1 x Powder Jar 2g
• 1 x Gel Bottle, 2cc
• 1 x Measuring Spoon
• 1 x Instruction Manual

Direction to Use

STEP-BY-STEP INSTRUCTIONS:

Dosage and Mixing :

• Dispense 1 scoop of MTA Plus powder on a glass slab or a non-absorbent pad.
• Dispense one small drop of MTA Plus Gel, OR some of the MTA Plus Liquid from 1 ampoule next to the powder. NOTE: The gel imparts washout resistance (for easier rinsing) and faster setting, which the Liquid does not. NOTE: MTA Plus Liquid ampoules are larger than unit-dose size.
• Gradually mix the liquid or gel into the powder until the desired putty-like consistency is obtained. For some procedures, a thinner, syrupy, stringy consistency may be desired. Thoroughly mix to hydrate the powder.
• If the material is not to be used immediately, cover the mixed material with a moist gauze sponge (use sterile water), or a clean cover to prevent evaporation. Extra gel or MTA Plus liquid may be used to rewet the powder before it sets.