Waldent 1:5 Increasing Fiber-Optic Push-Button Contra Angle Handpiece (W-144)
Original price was: $ 373.12.$ 131.16Current price is: $ 131.16.
1:5 Electric Contra Angle Push Button Handpiece with internal water spray
| Quantity | Price |
|---|---|
| 2 - 5 | $ 129.85 |
| 6 - 10 | $ 128.54 |
| 11 - 20 | $ 125.91 |
| 21 - 50 | $ 124.60 |
| 51 + | $ 121.98 |
... people are viewing this right now
Features
Description
Waldent 1:5 Increasing Contra Angle Handpiece (W-144) is an electric handpiece and is much stronger than air-driven handpiece since a motor is spinning the bur as opposed to air. This allows the dentist to efficiently remove caries at a faster pace. This handpiece greatly reduces chair time. These electric handpieces are routinely used in surgical procedures including implant procedures.
Key Specifications
- Maximum Rotation-2,00,000rpm
- Gear Ratio– 1:5
- Bur Type– ⌀1.60mm FG Bur
- Chucking Length– 11.6mm
- Bur Length– 25mm
- Water Spray– Internal/Quattro water spray
- Connection: E – type coupler
- Autoclavable– Upto 135 °C
Packaging
- 1 x Waldent 1:5 Contra Angle Handpiece
Direction to Use
Preparation:
- Ensure that the handpiece is properly sterilized using an autoclave before each use.
- Confirm that the bur is compatible with the handpiece and securely attached.
Connection:
- Connect the handpiece to the dental unit using the appropriate coupling.
- Ensure a secure and tight connection to prevent any air or water leakage.
Power Supply:
- Connect the handpiece to the electric power source as per the dental unit specifications.
- Verify that the power supply is within the recommended range for the handpiece.
Inserting the Bur:
- Press the bur release button to open the chuck.
- Insert the bur into the chuck and release the button to secure the bur in place.
- Confirm that the bur is properly seated to prevent wobbling during operation.
Water Supply:
- Connect the handpiece’s water supply to the dental unit’s water source.
- Ensure proper water flow for cooling during procedures.
Operation:
- Activate the handpiece according to the dental unit’s control settings.
- Observe the recommended speed and torque settings for the specific procedure.
- Use the push-button control to start and stop the handpiece as needed.
Post-Operation:
- After use, clean the handpiece thoroughly to remove any debris or residue.
- Disconnect the handpiece from the dental unit.
- If necessary, disassemble the handpiece for a more detailed cleaning.
Sterilization:
- Autoclave the handpiece and any detachable parts at temperatures up to 135°C.
- Store the sterilized handpiece in a clean and dry environment.
Maintenance:
- Regularly inspect the handpiece for any signs of wear or damage.
- Lubricate the handpiece.
