Waldent Ultrawave MaxPiezo 4 LED Ultrasonic Scaler
Original price was: $ 337.50.$ 150.00Current price is: $ 150.00.
Fiberoptic ultrasonic scaler with LED for rapid scaling and improved visibility
| Quantity | Price |
|---|---|
| 2 - 5 | $ 148.50 |
| 6 - 10 | $ 147.00 |
| 11 - 20 | $ 144.00 |
| 21 - 50 | $ 142.50 |
| 51 + | $ 139.50 |
Features
Description
The Ultrawave MaxPiezo 4 LED Ultrasonic Scaler, a marvel of innovation that seamlessly blends advanced technology with patient-centric care. Engineered to surpass expectations, this scaler boasts an autoclavable handpiece that withstands temperatures up to 135ºC and 0.22Mpa, ensuring impeccable hygiene standards are maintained.
Operating seamlessly on an input voltage of 230V±23V, this scaler brings forth a harmonious symphony of vibrations, ranging from 18kHz to 45kHz, to ensure procedures are not only efficient but also remarkably comfortable for patients. The incorporated T1AH250V fuse guarantees an extra layer of safety, upholding the device’s robust reliability.
With a continuous running operation mode, dental practitioners can effortlessly navigate treatments, allowing for uninterrupted workflows. Ensuring utmost safety, the Ultrawave MaxPiezo 4 aligns with Class 2 equipment protection standards and bears the B-type application part classification, a testament to its commitment to shielding both patients and clinicians from potential electrical hazards.
The scaler operates on software version V1.00, showcasing its adaptability to future enhancements. Seamlessly integrating with your practice’s infrastructure, it accommodates water pressure supplies ranging from 0.01Mpa to 0.5Mpa, guaranteeing consistent performance across different environments. The scaler’s tip amplitude, ranging from a minimum of 1μm with a deviation of -50% to a maximum of 100μm with a deviation of +50%, provides the precision required for a spectrum of dental procedures.
Incorporating these specifications, the Ultrawave MaxPiezo 4 LED Ultrasonic Scaler stands as a testament to technological prowess and unwavering dedication to patient care. With its intricate engineering and comprehensive features, this scaler empowers dental professionals to elevate their practice, setting new standards in precision, safety, and patient satisfaction.
Key Specifications
- Handpiece is autoclavable at 135ºC and 0.22Mpa
- Input voltage: 230V±23V
- Vibration frequency of tip:18kHz to 45kHz
- Fuse: T1AH250V
- Operation mode: Continuous running
- Protection against electric shock rating: Class 2 equipment
- Protection against electric shock degree: B type application part
- Software version: V1.00
- Pressure of water supply: 0.01Mpa to 0.5Mpa
- Tip amplitude- minimum:1μm,deviation -50% and
- Maximum:100μm,deviation +50%
Packaging
- 1× HP-5L Handpiece
- 1×Foot switch
- 1×Function control system with handpiece cord
- 1×Torque wrench
- 5×Scaler tips (G1, G2, G4, P1, E1)
- 1 x Wrench
- 1 x Endo Wrench
- 1 x O Ring
- 1 x Instruction Manual
- 1 x Packing List
- 1 x QC Certificate
- 1 x Pincture Device
- 1 x Pu Pipe
Direction to Use
- Prepare the patient
- Select the appropriate tip
- Adjust the power settingApply water: Before beginning the scaling procedure, apply a stream of water to the tooth surface to help cool the tip and wash away debris
- Position the tip at 0-40° with respect to the tooth surface, and apply light pressure.
- Move the scaler tip across the surface of the tooth, gently removing plaque and calculus. Keep the tip moving continuously to avoid causing damage to the tooth surface.
- Rinse and check: Rinse the tooth surface thoroughly to remove any debris, and check the tooth surface to ensure all calculus and plaque have been removed.
- Repeat as necessary
